Home > Flagstone > Flagstone A to Z > Arizona Flagstone Buckskin >

Arizona Flagstone Buckskin Stripe & Swirl Standup 2"
Arizona Flagstone Buckskin Stripe & Swirl Standup 2"
Arizona Flagstone Buckskin Stripe & Swirl Standup 2"


 
Alternative Views:


Call or Email us for a shipping quote
$34.99 will be added for each palletized or bagged material
Price Per Ton $449.00 Arizona quarry, low regional delivery rates
Inflation Fighter Sale $379.99
Savings: $69.01
Material Type: Quartzite Sandstone
Level Of Experience Required: Thick cut stone, 2" or more like this can be installed on a concrete or cement slab, decomposed granite or rock base or set into the soil on a pathway. This types installation does not require any experience.
Typical Time Required: Man Hours will vary according to volume of stone purchased, design and specifications.
Equipment Needed: Contractor grade wheelbarrow, or heavy duty upright dolly and basic masonry hand tools, masonry saw is helpful.
Additional Materials Needed: Pathway & Stepping Stone Setting - Decomposed granite or Class 1 Road Base, cement for pads, sand or mortar, if filling joints.

Quantity in Stock:250

Availability:: Usually Ships in 24 to 48 Hours
Product Code: 250FST200
Qty:

Description Material Transport Photos & Liability
 
Arizona Flagstone Buckskin Stripe & Swirl Patio Grade 2" Minus
Price Per Ton, Full Pallet Price
Buckskin Stripe and Swirl or Buckskin Swirl is a beautiful golden yellow sandstone flagstone with charcoal grey to coal black lines in it, that look like God air brushed the patterns himself. one stone at time. Each stone is work of natural art in of itself and this stone works as fantastic wall veneer, table slabs and flooring where lighting will highlight the delicate patterns.

Standup and Patio flagstone that is thinner than 2" is best installed on a concrete base with mortar and is typically are best install by an experienced mason.
Standup and Patio flagstone that is 2" or thicker is good with a sand, gravel, decomposed granite or cement a base is easily installed in landscapes by people with basic home improvement skills.

There is always going to be slight variance of square footage from pallet to pallet even if the weights are similar. The square foot coverage per ton of flagstone will vary with each project. Designs of the project, the average stone thickness, size of joints, pattern cuts, waste etc. will effect area coverage.

When ordering use the Purchase Order function at checkout and enter ROCK as your payment method. This will allow you to create an order for a firm transportation quote without having to pay for it at this time. While we have posted transport rates, in many circumstances we are able to ship the order to you for less. You will be given a firm cost on the whole order within a few minutes to a few hours.
Product Specifications and Uses
Arizona Flagstone Buckskin Stripe & Swirl Select 2" Minus
Patio Grade pieces range approximately 1 to 4 square feet in size.
Conforms to ASTM C 616- 85 Sandstone Building Stone as Listed below:
Resistance to abrasion averages 11.
Conforms to Type II Quartzitic Sandstone: With the exception that the specific gravity is about 140 lbs per cubic foot.
There is always going to be slight variance of square footage from pallet to pallet even if the weights are similar. The square foot coverage per ton of flagstone will vary with each project. Designs of the project, the average stone thickness, size of joints, pattern cuts, waste etc. will effect area coverage. The information is based on average full pallets weights.

Also available in Select and Patio cut grade of:
Thin - 1-1/4" minus
Regular - 1-3/4" minus
Two Inch - 2-1/4" minus
Thicker select stone 2-1/4" plus
Ledgestone
Slabs
Dimensional cut stone tiles

Share your knowledge of this product. Be the first to write a review »